KINGSTON ValueRAM RAM Module - 16 GB (1 x 16 GB) - DDR4 SDRAM

KVR26N19D8/16

This product has been discontinued by the manufacturer

Please visit

KINGSTON RAM Modules

for alternative options.

Description

This document describes ValueRAM's KVR26N19D8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 2Rx8, memory module, based on sixteen 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:

FEATURES
  • Power Supply: VDD=1.2V Typical
  • VDDQ = 1.2V Typical
  • VPP - 2.5V Typical
  • VDDSPD=2.2V to 3.6V
  • Nominal and dynamic on-die termination (ODT) fordata, strobe, and mask signals
  • Low-power auto self refresh (LPASR)
  • Data bus inversion (DBI) for data bus
  • On-die VREFDQ generation and calibration
  • Dual-rank
  • On-board I2 serial presence-detect (SPD) EEPROM
  • 16 internal banks; 4 groups of 4 banks each
  • Fixed burst chop (BC) of 4 and burst length (BL) of 8via the mode register set (MRS)
  • Selectable BC4 or BL8 on-the-fly (OTF)
  • Fly-by topology
  • Terminated control command and address bus
  • PCB: Height 1.23" (31.25mm)
  • RoHS Compliant and Halogen-Free

Specifications

General Information

Manufacturer:
Kingston Technology Company
Manufacturer Website Address:
http://www.kingston.com
Brand Name:
Kingston
Product Family:
ValueRAM
Product Name:
16GB 2Rx8 2G x 64-Bit PC4-2666 CL19 288-Pin DIMM
Product Type:
RAM Module

Technical Information

Memory Size:
16 GB
Memory Technology:
DDR4 SDRAM
Memory Voltage:
1.20 V
Number of Modules:
1 x 16 GB
Memory Speed:
2666 MHz
Memory Standard:
  • DDR4-2666/PC4-21300
Error Checking:
Non-ECC
Signal Processing:
Unbuffered
CAS Latency:
CL19

Physical Characteristics

Number of Pins:
288-pin
Form Factor:
DIMM
Width:
31.3 mm
Length:
133.4 mm

Miscellaneous

Green Compliant:
Yes