Smart-UPS RT is a family of high preformance UPSs for servers, networking equipment, telecommunication systems, industrial and medical equipment, and other mission-critical applications. Smart-UPS RT UPSs are based on the field-proven, industry-leading Smart-UPS functionality, but features double conversion on-line topology, which delivers tight voltage and frequency regulation, zero transfer time to and from battery, and input power factor correction. While offering advanced performance and high availability features, the Smart-UPS RT can be managed using PowerChute software, as well as an array of SmartSlot accessories. Smart-UPS RT provides battery back up to the load through the use of internal batteries. However, an unlimited number of external battery packs can be added to meet desired levels of runtime. All Smart-UPS RTs and battery packs ship in tower configuration, while easily converting to the 19" rack-mount mode with the addition of an APC Rail Kit.


AVAILABILITY


Double Conversion On-Line No interruption for your mission critical applications when the UPS transfers to and from the batteries.

Continuous Voltage and Frequency Regulation Smart-UPS RT provides premium, regulated sine-wave power for the sensitive loads. This unit is also compatible with generator set where it takes in raw power and puts out premium, regulated sine-wave power.

Wide input voltage range A 160-280 VAC input voltage range, at full load, means less time on battery while preserving the battery capacity for blackout conditions. The input voltage to the UPS can go as low as 100 VAC, at lighter loads without using the batteries, and still provide conditioned utility power to the load.

Scalable Run Time Unlimited number of matching battery packs can be added to increase the runtime to the desired amount.

Built-in automatic bypass Ensures seamless power to the loads even in the event of an electronics failure or an overload condition

Hot Swap Batteries Ensures continuous operation of the load even when the batteries are being replaced

Downloadable Firmware Makes the UPS field-upgradeable.

Cold-start You can power on the unit without any input power. This provides temporary emergency battery power when the utility power is out.

Intelligent Battery Management Micro-processor controlled battery charging and diagnostic testing ensures maximum battery life.

Faster Recharge Time The Smart-UPS battery charging system is microprocessor controlled to precisely charge batteries in less time than legacy UPS systems. This makes your system available more quickly for subsequent power disturbances.


MANAGEABILITY


Audible Alarms Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.

Status Indicator LED's Provides operational status information of the UPS at a glance. Does not require the use of a computer. Bar meters and status indicators are simple to use and easy to understand.

Automatic Self Test The product automatically performs a self-test every two weeks. This ensures you will be alerted to degraded batteries before they wear out. Through software, or the push of a button, you may perform self-tests anytime.

Load Meter The Load Meter prevents you from exceeding the UPS capacity. The Volt Meter reports utility line voltage and battery capacity, allowing you to gauge how much time remains before the batteries are depleted. An alarm sounds when batteries are low allowing you to save data and shutdown your system.

Built-in SmartSlot Choose from various management cards to customize your UPS and increase overall system availability. Options include; out-of-band management and remote power off. SmartSlot management cards are sold separately.

Software PowerChute Business Edition, departmental-level UPS management software, provides safe system shutdown and UPS management for servers and workstations.

Network Management UPS Network Management Card with Environmental Monitoring provides management of the UPS by connecting directly to the network via web browser, Telnet or SSH. Notification features inform you of problems as they occur. For protected servers, graceful unattended shutdown software is provided.

Terminal Mode Programmability Terminal mode is a menu-driven interface that allows for quick and easy configuration of the UPS. This interface can be accessed using a computer and a common serial communication application, such as Hyperterminal. Terminal mode is ideal for customers who are not using PowerChute plus or a management card.


ADAPTABILITY


Rack/Tower Convertible The UPS has a flexible form factor enabling it to be installed into a variety of user environments

1:1 and 3:1 Combo in a Single Product This feature allows the same product to be wired either to a single phase input or a three phase input. Available in only Smart-UPS RT 7500/10000 VA models.

Multiple Output Voltages The 230V nominal output voltage can be programmed for 220V or 240V operation.

Programmable Frequency This UPS automatically provides 50 or 60 Hz, and can be user-set to either value, including desired tolerances.

Downloadable Firmware Makes the UPS field-upgradeable.


PROTECTION


Lightning and Surge Protection When measured via ANSI/IEEE 587 Category ''A" and "B" tests, the suppression performance of the APC Smart-UPS is superior to virtually all separate surge suppressors.

Network-grade line conditioning Full time EMI/RFI filters prevent line noise from causing data errors

Sine-wave output Sine-wave output provides assurance of compatibility with all types of loads.

Unattended Safe & Graceful Shutdown Prevents possible data corruption by performing graceful, unattended operating system shutdown in the event of an extended power outage.

EPO Attach the device to an Emergency Power Off (EPO) system so that power can be turned off in an emergency situation.


ECONOMY


Input Power Factor Correction Reduced utility and wiring costs. Increasingly a legislative or specification requirement.